IR Flame and Spark Sensors (Rear Viewing)
These sensors can operate on
conventional 2 wire (14-28Vdc) fire systems or 4-20mA process
control systems. Relay contacts are also available for Fire and
Fault signals. The sensors operating modes can be user selected
giving a choice of alarm currents, response times, latching or
non-latch outputs and sensitivity.
Internal self-test sources will check the sensors operation when
remotely instructed.
The sensors have a maximum ambient operating temperature of 55°C
|
|
|
Features
-
Able to detect open flames and
glowing embers
-
Sensitive to flickering IR
-
Optical self test feature
-
Has a 90° field of view
-
Selectable response speed
-
Low power consumption
-
Shielded electronics against RF interference,
-
Works through layers of dust or dense material flow
-
Material flow is not obstructed due to flush-mounting.
-
Easy installation/maintenance with mounts and accessories.
-
Optional air purge adapter for special applications.
-
Impact-resistant lens material to protect sensor optics.
|
Applications
-
Agriculture
-
Bed Fillings
-
Dust Collection/Filters
-
Dryers
-
Felt Manufacture
-
Wallpaper Production
-
Wood Working
-
Coal Milling
|
|
|
Rear Viewing Flame Detectors |
Image
|
Description |
Part Number &
Photograph
|
|
IR Flame &
Spark Sensor for DIN Rail Mounting
(Housing material Glass Reinforced Polycarbonate, Colour Blue)
-
See Data Sheet
-
See Additional Photographs
|
016502
|
|
|
IR Flame & Spark Sensor for
Bayonet Mounting
(Housing material Glass Reinforced Polycarbonate, Colour Blue)
-
See Data Sheet
-
See Additional Photographs
|
016500
|
|
IR Flame &
Spark Sensor for Bayonet Mounting
(Housing material Die Cast Zinc Alloy, Colour Blue)
-
See Data Sheet
- See
Additional Photographs
|
016580
|
|
|
|
IR Flame & Spark Sensor for
Bayonet Mounting
(Housing material Die Cast
Zinc Alloy, Colour Blue) - Continues Operation at Temperatures
up to 85C
-
See Data Sheet
- See
Additional Photographs
|
016280
NEW
|
|
Flame Detectors -
Series 16500 - Single IR
|
|
Intrinsically Safe (IS) for Hazardous Areas
These sensors have been approved by BASEEFA (British Approvals
Service for Electrical Equipment in Flammable Atmospheres) to
EN50014, EN50020 and EN50284.The requirements of Directive
94/9/EC, the ATmosphere EXplosives ATEX Directive
have also been met. Not suitable where light is visible.
The sensors are certified;
ATEX:-
 II 1 G CENELEC / IEC:-
EEx ia IIC T4
Apparatus Certificate Number:-
BAS02ATEX1001
|
|
Rear Viewing Flame Detectors |
Image
|
Description |
Part Number &
Photograph
|
|
IS, IR Flame & Spark Sensor for
Bayonet Mounting
(Housing material Glass Reinforced Polycarbonate, Colour Blue)
-
See Additional Photographs
|
016550
|
|
|
IS, IR Flame & Spark Sensor for
Bayonet Mounting
(Housing material Die Cast Zinc Alloy, Colour Blue)
-
See Additional Photographs |
016570
|
|
|
|
|
Accessories for use with Flame Detectors
- Rear View DIN Rail Mounts and
Accessories
- Rear View Bayonet Mounts and Accessories
- Testing
User
Documents for Flame Detectors
-
User Documentation (Downloads)
|
